Датчик нагрузки LCS-C2B(500 кг/1/2/3/5/10/20/25/30/50/60/100 t

Заполнитель

Simple and solid structure Strong lateral force resistance and offset load Low center of gravity, easy to install High accuracy and long-term stability Optional measurement range: 5-1000kN (approximate 0.5-100t)

Description
Material	Alloy Steel or Stainless Steel
Rated Load (kN)	5/10/20/30/50/70/100/200/300/500/1000
Performance Indicator
Overall Precision	0.05(linearity+ hysteresis + repeatability)
Sensitivity	2.0 mV/V
Excitation Voltage	5- 12V DC (recommend 5V )
Creep (in 30 min)	±0.05%F.S/30min
Zero balance	±1%FS
Input Resistance	380±10Ω or 750±15Ω
Output Resistance	350±3Ω or 700±5Ω
Insulation Resistance	≥5000MΩ
Working Environment
Safety Overload	150%F.S
Operation Temperature Range	-20 to +65ºC
Zero Drift	±0.05%F.S/10ºC
Output Drift	±0.05%F.S/10ºC
Protection Class	IP65

Optional Range	USD Price (without freight)
500kg/1t/2t/3t	115.00
5t	125.00
10t/20t	131.00
25t	163.00
30t	192.00
50t	288.00
60t	355.00
100t	537.00
Please note that price is not same for all the optional range. please leave message for us for different range. Our default price USD 115 is for 500kg/1t/2t/3t

When you choose load cell, please pay attention to below:

Force direction, installing mode Load cell capacity: Please make sure not overload. Measured load should be 50-70% of load cell rated capacity. Sensitivity Load cell output mV signal. Load cell cable length can affect load cell output, so please use transmitter/amplifier to transit 0-5V, 4-20mA or digital s

Please read our manual carefully to get more info before you use our product.

The product is dealt with sealing protection in the process of producing. So if meeting any fault, please do not knock beam body or open it to maintain at your own discretion, and do not disassembly the parts in load cell.

Attention:

Load cell is high precision components. To make sure measured precision, controlling force should be transferred with any influence of eccentric load and lateral load. In the measurement, action line of outside force should coincide with load cell stressing axis. Please follow force direction on the beam of load cell to use it. When install load cell, please avoid strong impact or wiring and beam broken caused by strong pulling. Please keep load cell in -10℃to 65℃ and relative humidity less than 75% for long-term unused condition. Please do not make any soldering jobs on the load cell carrying device. Not use in the water for load cell without any special treatment. Wire should be connected reliably, and not connect to metallic conductor. If order several load cell and transmitter, digital meter etc. and need to match each one, please follow serial number on sticker to connect them.